Equipment

Equipment is all of the machinery that can be installed on or within a ship to perform a function.

Equipment initially arrives as a box with the equipment name on it. This box is treated like any other cargo. The equipment needs to be installed by a crew member before it can be used.

Getting Equipment

• Most equipment can be purchased via the Trade menu while in a Colony or Shipyard system, though some equipment may be out of stock in that system.
• Equipment may be left in space when a ship is destroyed. This equipment will appear in boxed form and can be picked up with Logistics Drones.
• Some equipment can be manufactured on the ship. This requires the ship have manufacturing equipment, and often requires research to unlock the recipe.

Installation

Once equipment is on the ship in boxed form, it can be installed by selecting it in the Construction -> Install menu, and then selecting the location to place the equipment. A crew member is required to perform the actual installation. If the install location is outside the ship, the crew member will need a spacesuit.

Each piece of equipment has a grid footprint. Some equipment footprints reserve a space for crew or passenger access. Most equipment also has cable and/or pipe connection points.

Placement

It's recommended to be in the top-down Schematic view when placing equipment, rather than the standard isometric view, as it's easier to see where the equipment footprint falls.

Equipment varies as to where on the ship it is allowed to be placed. Valid locations fall into common categories:

Install Location Categories

Location	Description
Fully Inside	Must be within the ship and not intersect any walls.
Fully Outside	Can be placed on scaffolding outside the ship. It is sufficient for one square of the equipment to overlap scaffolding. Currently all equipment capable of being installed outside can also be installed inside.
Hull wall	The equipment must intersect the hull wall. Typically a portion of the equipment is required to fall inside or outside the ship.

A few pieces of equipment break convention. Mining Lasers, for example, cannot be fully inside, but hull wall and fully outside are both valid.

Orientation

Some equipment can be rotated by pressing R. This rotates the footprint and changes where the cable and pipe connection points fall.

Equipment may display an arrow indicating a direction it operates in, such as a thruster's output. Typically this is hull wall placed equipment and the arrow points towards/through the exterior side.

Reserved Space

In addition to the equipment footprint itself, some equipment requires a certain amount of space along one side to be free of any other equipment. This limits the valid placement for this equipment, and also limits the valid placement of future equipment as it can't impinge on this space.

Equipment Requiring Clear Space

Equipment	Equipment Side	Spaces Required
Docking Bay	Interior	2 spaces beyond footprint. Because the footprint already includes one clear space, this appears as 3 spaces after install.
Ladder	Arrow side	1 space
Engine	Left	6 spaces
Thruster	Exterior	2 spaces
Drone Bay	Exterior	3 spaces
Mining Laser	Firing	6 spaces
All Weapons	Exterior	6 spaces
Deflector	Exterior	8 spaces

Connection

Most equipment has cable and/or pipe connection points, which need to be connected after the equipment is installed for the equipment to function.

Power

Equipment that requires power has a light red hexagon shaped connection point. A cable carrying power should be run to this connection point.

1. When equipment is not receiving power, the equipment icon is darkened and a red lightning bolt flashes on it.
2. When equipment is connected to power, it will begin powering up. During this time the equipment remains dark, but the flashing lightning bolt is replaced by a light red power bar that begins filling.
3. Once the power bar fills, the equipment will be fully powered up, and the icon will lighten.

Pipes

Pipe connections are circles that are color coded to match the fluid/gas.

• When not connected the circle is unfilled, has an arrow indicating the direction of flow, and displays text labelling the type.
• Once connected, the text and arrow disappear. If the connection is an input with nothing flowing, the circle will be unfilled, otherwise the circle will be filled.
• Tanks do not have a pre-defined type, nor a flow direction, so when empty and unconnected the circle will be a generic gray color and lack an arrow or text label.