Stargate Project, Phase 5
Stargate Project, Phase 5 is the fifth phase of the gameplay event Stargate Project and focuses on powering up the Stargate for the first time. The player must build and install the necessary energy infrastructure to activate the gate and prepare for interstellar travel.
Objective
To complete this phase, the player must generate a burst of 1,000 MW to activate the Stargate and maintain a continuous power flow of 100 MW to keep it online.
Preparation
The following steps must be taken:
- Build five Energy Transmitters at the Assembly Table.
- Install them on a ship capable of producing at least 1,000 MW of power.
- Deliver a 1,000 MW energy burst to the Stargate.
- Maintain 100 MW of continuous power.
All five Energy Transmitters must be installed and powered; simply carrying them in cargo does not fulfill the requirement. Only ships with sufficient energy output and internal control systems can manage the sustained power load.
The activation is initiated via the Stargate tab if the ship is located at the Stargate Star System.
Completion
After supplying the required energy, the Stargate powers up and remains online as long as the 100 MW baseline power is sustained. This permanently opens the gate for use, allowing access to a new sector in Stargate Project, Phase 6.
Notes
- Energy Transmitters must be active and online.
- Power must be supplied continuously; a drop below 100 MW will shut down the gate.
- Upon completion, a short tutorial appears, introducing the player to inter-sector travel using the stargate.
- All energy transmitters, except one, can be dismantled after the startup phase, as a single unit is sufficient for providing the required 100 MW.